The Doan Firestarter

Why Doan?   How-To-Use   Testimonials   Compared & Tested  Where-to-Buy  Contact Us


The Doan Firestarter

How-to-Use the Doan Magnesium Fire Starting Tool

 

HOW TO USE

WARNING: Gasoline is too hazardous to use but kerosene and diesel fuel are acceptable.

 

STEP 1

Support edge of tool on ground. Scrape narrow side of tool marked "SHAVING EDGE" with knife blade held perpendicular to tool. Amass small pile of magnesium about the size of a quarter next to tinder. (paper. leaves, small twigs, bark, etc.)

 

STEP 2

Support edge of tool on ground within 1" of magnesium shavings at approximately 45° angle. Scrape entire length of side marked "SPARKING INSERT" rapidly with knife held perpendicular to SPARKING INSERT. This action will cause generate sparks, causing the magnesium shavings to ignite, providing a white hot flame. If you don't want to dull your knife, a small hacksaw blade works great!

 

 

SURVIVAL TIPS

 

Under windy conditions, the magnesium shavings should be placed in a depression in the ground.

Will ignite rubber to create a distress smoke signal. (Use tire from your vehicle if necessary to attract aircraft.)

 

If fine tinder is not available, use the following:

  • Parts of personal clothing (pocket lining, handkerchief, etc.)

  • Vehicle Upholstery

  • Drain oil from vehicle and place in hubcap, soak rags with oil and ignite. (Will also create smoke signal.)

 

Copyright ©1984-2008, DOAN MACHINERY & EQUIPMENT CO., INC.

 The The Doan Firestarter  site and its entire contents Copyright 1984-2009 under license from DOAN MACHINERY & EQUIPMENT CO., INC. All Rights Reserved